64 52 ... Removing and installing compressor bearing block (M57T2)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove compressor for A/C system

Slacken bolts (1). Release bolts (2).

Fig 1: Slacken Bolts (1) And Release Bolts (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolts (1) and remove bearing block (2). Tightening torque 64 52 5AZ. Installation: Replace damaged adapter sleeves.

Fig 2: Release Bolts (1) And Remove Bearing Block (2)

Courtesy of BMW OF NORTH AMERICA, INC.