64 11 837 Replacing SERVODRIVE For Right Blending Flap

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove instrument panel trim . See 51 45 075 REMOVING AND INSTALLING CARRIER FOR INSTRUMENT PANEL .

NOTE: For purposes of clarity, following graphics show instrument panel carrier removed.

Release screws (1).

Remove servomotor (2) and disconnect plug connection (3).

Fig 1: Identifying Servodrive And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.