64 11 822 Replacing SERVODRIVE For Left Rear Cabin Blending Flap

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove carrier for instrument panel . See 51 45 075 REMOVING AND INSTALLING CARRIER FOR INSTRUMENT PANEL .

Release screws (1) and feed out air duct (2).

Fig 1: Identifying Air Duct With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2) and remove servodrive (3).

Fig 2: Identifying Plug Connection And Servodrive With Screws

Courtesy of BMW OF NORTH AMERICA, INC.