64 11 376 Removing And Installing (Replacing) Control Panel For Heater - A/C System
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove middle trim for instrument panel . See 51 45 310 REMOVING AND INSTALLING (REPLACING) CENTER TRIM FOR INSTRUMENT PANEL .
Disconnect plug connection (1).
Unclip control panel (2) along dashed line from trim (3) and remove.
IMPORTANT:
The electrical steering column adjuster must be normalized when the control panel for the heater - A/C system is programmed or replaced.