LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> X5 30i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 771 (General Electrical System - Repair) >> 33 Horn >> 61 33 050 Removing And Installing/Replacing Right Fanfare Horn

61 33 050 Removing And Installing/Replacing Right Fanfare Horn

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

WARNING: Risk of injury

Tape off edges (1) of bumper trim.

Fig 1: Identifying Edges Of Bumper Trim
G04792418Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and feed out holder (2) with fanfare horn.

Tightening torque. See GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUES .

Disconnect associated plug connection.

Remove fanfare horn (2).

Fig 2: Identifying Fanfare Horn And Holder
G04792419Courtesy of BMW OF NORTH AMERICA, INC.