61 12 067 Replacing Wiring Harness For Rear Bumper
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear bumper trim . See 51 12 156 REMOVING AND INSTALLING REAR BUMPER TRIM .
Disconnect plug connections (1) on ultrasonic transducer.
Unclip wiring harness from bumper trim and remove.
Installation:
Make sure wiring harness is correctly laid.