61 12 062 Replacing Wiring Harness For Front Bumper
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
Disconnect plug connections (1) on ultrasonic transducer.
Unclip wiring harness (2) from bumper trim.
Installation:
Make sure wiring harness (2) is laid correctly.