52 26 005 Removing and Installing / Replacing Rear Seat
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Unclip rear seat on left and right towards top.
Installation:
Feed seat belt buckles (1) into openings in rear seat.
Release screw (1) on seat belt (middle).
Tightening torque 72 11 22AZ. See 72 11 SEAT BELTS
Installation:
Seat belt is coded against incorrect installation.
Feed out anchor fitting (2) through rear seat.
If necessary, unlock and disconnect plug connection for seat heating.
Lift out rear seat.