52 26 000 Removing and Installing/Replacing Left Or Right Rear Seat (For 3Rd Seat Row)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Right rear seat is removed in the same way as the left rear seat depicted here.
Unclip cover (1) on left and right and remove in direction of arrow.
Installation:
Replace faulty cover.
Release screws (1) on left and right.
Tightening torque 52 26 10AZ. See 52 26 REAR SEATS (THROUGH-LOADING SYSTEM)
Release screw (1).
Remove cover (2) in direction of arrow.
Fold rear seat backwards forwards.
Release screws (1).
Tightening torque 52 26 10AZ. See 52 26 REAR SEATS (THROUGH-LOADING SYSTEM)
Unlock plug connection (1) and disconnect.
IMPORTANT:
Risk of damage! Cover sill and entrance area with protective covers.
Slide rear seat forwards (guide pin out of guide).
Lift rear seat with a 2nd person helping out of vehicle.