51 71 478 Removing And Installing/Replacing Trim On Rear Left Or Right Wheel Arch

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Release blind rivets (1).

Release trim (2) at clips (3) and remove.

Fig 1: Identifying Blind Rivets And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged.

If necessary, replace faulty clips (2).

Fit clips (2) with sealing ring.

Fig 2: Identifying Catches And Clips

Courtesy of BMW OF NORTH AMERICA, INC.