36 11 121 Removing And Installing/Replacing An RDC Trigger Transmitter (Front)

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially detach front wheel arch trim . See 51 71 038 REMOVING AND INSTALLING/REPLACING FRONT LEFT OR RIGHT WHEEL ARCH COVER (FRONT SECTION) .

Disconnect plug connection (1).

Release plastic nuts (2) and remove trigger transmitter (3).

Installation:

If necessary, replace plastic nuts.

Fig 1: Identifying Plastic Nuts And Trigger Transmitter

Courtesy of BMW OF NORTH AMERICA, INC.