22 11 110 Replacing Left Engine Support Arm (N52K)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Secure engine11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N62) . Refer to in installation position
- Remove reinforcement plate. Refer to 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE
- Remove upper section of microfilter housing. Refer to 64 31 081 REMOVING AND INSTALLING/REPLACING MICROFILTER HOUSING
- Remove heat shields
- Remove manifold.
- Remove air ducts
Release screw (1).
Release bracket (2) with oil line.
Release screws and engine support arm.
Tightening torque 22 11 3AZ. Refer to 22 11 ENGINE SUSPENSION .