LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> X5 30i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Engine Electrical System - Repair (N52)) >> Alternator With Drive And Mounting >> 12 31... Replacing Alternator Belt Pulley (With Overrunning Clutch) >> Special tools required:

Special tools required:

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install alternator drive belt.

Grip alternator shaft with:

Release nut with special tools 12 7 120.

Installation: 

Tighten to specified torque.

scientia non olet · About LEMON Manuals