LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> X5 30i, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Restraints - Tightening Torques) >> 12 Airbag Modules >> 72 12 Airbag Modules

72 12 Airbag Modules

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - AIRBAG MODULES

  Type Thread Tightening specification Measure
1AZ Airbag module in door, door trim panel or in side frame, holder E36 / E38 / E39 / E46 / E52 / E53     8.5 Nm
2AZ Gas generator of ITS head airbag on body E38 / E53 M6 nut   4 Nm
  E83     6.5 Nm
3AZ Bracket of ITS head airbag on body E38 / E39 / E46 Metal screw   2.5 Nm
  E83     6.5 Nm
4AZ ITS head airbag to body (end fitting) E38 / E39 / E46 / E53     11 Nm
  E83     6.5 Nm
5AZ Additional steel bracket for ITS head airbag on body E38 / L7 Self-tapping screw M5   3 Nm
6AZ Gas generator of ITS head airbag on body E39 / E46 M6 nut or oval-head screw, thread-tapping   4 Nm
7AZ Passenger airbag module on instrument panel carrier E36 except Z3 / E52 M8   22 Nm
8AZ Passenger airbag module on instrument panel carrier E36 Z3 M8   24 Nm
9AZ Passenger airbag module on instrument panel carrier E38 / E39 M6 nut   10 Nm
  E83 M6 nut with pressed-on washer   6 Nm
  E85 M6   8 Nm
10AZ Retaining strap for cover, passenger airbag module on instrument panel carrier E46 / E52 / E83 M6   9 Nm
11AZ Passenger airbag module on instrument panel carrier E46 / E53 M8 nut   22 Nm
12AZ Head airbag cassette in rear compartment to body E38 / E39 M6   11 Nm
13AZ Gas generator, head airbag in rear compartment, to body E38 M6 nut   4 Nm
14AZ Bracket of ITS head airbag on body E46 Coup / E53 Metal screw   4 Nm
15AZ ITS head airbag gas generator to body for conversion from 1.0 to 1.1 E38 M6   4 Nm
16AZ Gas generator, head airbag, in rear comp. to body (parcel shelf) E39 M6   4 Nm
17AZ Head airbag cassette in rear compartment to body E53 Metal screw   3 Nm
18AZ Gas generator, head airbag in rear compartment, to body E53 M6   4 Nm
19AZ Airbag module for knee protection E85 M6 Replace screws 8 Nm


TIGHTENING TORQUES - AIRBAG MODULES

  Type Thread Tightening specification Measure
1AZ Passenger airbag module (instrument panel) E70   Replace screws 4 ± 0.3 Nm
2AZ Bracket, folding pack for head airbag, to body E70 Metal screw   5 Nm
  E70 Oval-head screw with collar   4 Nm
3AZ Ramp to body E70 M6   6 Nm
- to B-pillar E70     4 Nm
- to C-pillar E70     4 Nm
4AZ Gas generator - to side frame E70     4 Nm
5AZ Deformation plate - to A-pillar E70     4 Nm
6AZ Airbag module - to seat side frame E70     6 Nm