34 51 Slip Control System (DSC)
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit on hydraulic unit | E70, E71, E72 | Initial tightening Final tightening | 2 ± 0.5 Nm 4.3 + 0.5 Nm | |
| 2AZ DSC sensor to floor pan | E70 | 8 Nm | ||
| 3AZ Pulse generator to swivel bearing/wheel carrier | E70 | 8 Nm | ||
| 4AZ Hydraulic unit to bracket | E70 | M8 | 19 Nm | |
| 5AZ Bracket, hydraulic unit, to body | E70 | 8 Nm | ||
| 6AZ ICM control unit to body | E71, E72 | 8 Nm |