33 55 Stabilizer Bar
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - STABILIZER BAR
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Retaining bracket, stabilizer bar to rear axle support |
E70 |
M10 |
|
56 Nm |
| 2AZ Stabilizer link on anti-roll bar/swinging arm |
E70 |
M12 |
Replace nut |
100 Nm |