12 42 Starter cable
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - STARTER CABLE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Assembly, starter/alternator cable to alternator terminal B+ | N62TU | M8 | 21 Nm | |
| 2AZ Assembly, starter/alternator cable to starter terminal 30 | N62TU | M8 | 13 Nm | |
| 3AZ Assembly, starter/alternator cable to supply support point | N62TU | M8 | Flange nut | 15 Nm |
| 4AZ Assembly, grounding cable to engine support frame | N62TU | M8 | 21 Nm | |
| 5AZ Assembly, grounding cable to engine frame side member | N62TU | M8 | 21 Nm | |
| 6AZ Assembly, B-jump-start connection point | N62TU | M8 | Flange nut | 15 Nm |
| 7AZ Assembly, engine wiring harness to ground support point, spring strut dome | N62TU | M8 | 21 Nm | |
| 8AZ Assembly, ignition module ground to ZKH | N62TU | M5 | 5 Nm |