51 16 210 Removing and installing/replacing trim for preselector lever
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Apply parking brake
- Move selector lever into N position
- Remove gaiter for shift block
Unclip trim for preselector lever (1) towards top.
Disconnect associated plug connections and remove trim for preselector lever (1).
Installation:
Retainers (1) must not be damaged or missing.
Make sure retainers (1) are correctly seated in appropriate mounts of trim for preselector lever (2).