11 00 Removing and installing/replacing ignition coil cover (N52K)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Release screws.
Tightening torque: 11 12 6AZ, see 11 12 CYLINDER HEAD WITH CYLINDER HEAD COVER .
Remove ignition coil cover (1).