Necessary preliminary tasks
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
- Remove GLASS SLIDE/TILT SUNROOF COVER AT FRONT .
- Remove GLASS SLIDE/TILT SUNROOF COVER AT REAR .
- Remove FRONT WATER GUTTER .
- Fully open glass slide/tilt sunroof cover mechanism.
To clean the guide rails, use cleaning kit with part number 54 10 7 306 684 .
Insert cleaning cloth (2) in guide rail as illustrated.
Place cleaning tool (1) on cloth (2) and screw-in in direction of arrow.
Pull cleaning kit (1) and (2) from front to rear through guide rail.
Remove dirt contamination from end of guide rail.
Reapply GREASE to guide rail.
Move glass slide/tilt sunroof cover mechanism into tilt position for cleaning remaining front sliding surfaces.
Use cleaning cloth to clean dirt and old grease from following components:
- Control carriage, wind deflector
- Spring carriage
- Lower gate at front
- Upper gate at front