51 12 801 Replacing bracket for rear bumper at left or right

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove REAR BUMPER SIDE SECTION .

Release screws/nuts (1).

Release expander rivets (2) and remove bracket (3).

Tightening torque 51 12 3AZ .

Fig 1: Identifying Expander Rivets, Bracket And Screws/Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides in area (A) of bracket (2) must not be damaged.

If necessary, replace faulty metal nuts (1) on bracket (2).

Fig 2: Identifying Bracket, Metal Nuts And Guide In Area

Courtesy of BMW OF NORTH AMERICA, INC.