11 36 715 Removing and installing/replacing both solenoid valves on left side (S63): Notes
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Always check that the solenoid valves are clean during removal and installation.
Possible malfunctions if valves are contaminated:
Possible malfunctions if valves are contaminated:
- Irregular operation.
- OBD incorrect entry.
- Poor exhaust gas values.
- Low engine performance.
IMPORTANT:
Risk of damage!
Do not clean solenoid valves with compressed air.
Do not clean solenoid valves with compressed air.