64 11 970 Replacing fogging sensor (up to 10/2008)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INSIDE MIRROR .

Unclip fogging sensor (1) from retaining tabs (2). Disconnect plug connection (3). Installation: Make sure fogging sensor (1) is securely seated.

Fig 1: Identifying Fogging Sensor And Retaining Tabs With Plug Connection

Installation: Sensor surface (1) must be clean and free from grease.

Fig 2: Identifying Sensor