72 12 050 Removing and installing side airbag (front seat)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY REGULATIONS for handling airbag modules and pyrotechnical seat belt tensioners.
Incorrect handling can cause airbags to trigger, resulting in serious injuries.

Necessary preliminary tasks

Clamp off BATTERY NEGATIVE LEAD
Partially detach backrest cover . See 52 17 405 REPLACING BACKREST COVER FOR LEFT OR RIGHT FRONT SEAT (COMFORT) or 52 13 405 REPLACING BACKREST COVER FOR LEFT OR RIGHT FRONT SEAT (NORMAL/SEMI-ELECTRIC)

Remove cover (1).

Fig 1: Identifying Backrest Cover

G04792877

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock PLUG CONNECTION (1) and disconnect.

Release screws.

Installation:

Replace screws.

Tightening torques 72 12 06AZ .

Fig 2: Identifying Plug Connection

G04792878

Courtesy of BMW OF NORTH AMERICA, INC.

Remove airbag module (1) from inner bag (2).

Installation:

Pull inner bag (2) fully over airbag module (1) and screw brackets.

Fig 3: Identifying Inner Bag And Airbag Module

G04792879

Courtesy of BMW OF NORTH AMERICA, INC.