11 00 Standard screw connection
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - STANDARD SCREW CONNECTION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Screws and nuts | M5 | 5 Nm ± 0.5 | ||
| 2AZ Screws and nuts | M6 | 8 Nm ±±1 | ||
| 3AZ Screws and nuts | M7 | 13 Nm±2 | ||
| 4AZ Screws and nuts | M8 | 19 Nm±3 | ||
| 5AZ Screws and nuts | M10 | 38 Nm±5 | ||
| 6AZ Hose clamp, WAF 5 | 1.0 to 1.5 Nm | |||
| 7AZ Hose clamp, WAF 6 | 2.5 up to3.5 Nm |