11-9260 Holder

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

0493938 119260 Holder Minimum set: Mechanical tools MW

NOTE: (Counter support with screw connection) For holding the flywheel when gearbox is removed [Released]

Storage Location

B43

SI number

01 01 01 (662)

Consisting of:

= 0494034 Holder

Fig 1: Identifying Holder (0493938)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Individual counter support) [Released]
= 0494035 Screw
NOTE: (Screw (M10 thread) with washer) For screwing counter support [Released]
= 0494129 Bush
NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73 [Released]
= 0494130 Screw
NOTE: (Screw (M12 thread)) For counter support for retaining flywheel when gearbox is removed [Released]
= 0494793 Bush
NOTE: [Released]
= 0495216 Bush
NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2 [Released]