36 10 209 Checking front and rear wheel for face and radial runout

Special tools required: 

• 36 1 030 TESTER .

Necessary preliminary tasks: 

• Check wheel bearings

Lift vehicle.

Check wheel with special tool 36 1 030  (measuring fixture) for lateral runout and radial runout, see 36 10 WHEELS ONE-PART ALLOY WHEELS ;36 10 WHEELS STEEL AND ALUMINUM STRIP WHEELS ;36 10 WHEELS TWO-PART ALLOY WHEELS. 

Fig 1: Lateral Runout With Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Checking Radial Runout With Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

If applicable, remove balance weights.

Fig 3: Lateral Runout Of Rim With Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Radial Runout With Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.