31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

Special tools required: 

• 31 1 140 OPEN-END WRENCH WAF 16/18

Release nut - grip with special tool 31 1 140  .

Remove hinged bracket (1) from stabilizer (2).

Installation: 

Replace self-locking nut.

Tightening torque: 31 35 5AZ, see 31 35 STABILIZER BAR .

Release nut - grip with special tool 31 1 140  .

Remove hinged bracket (1) from stabilizer (2).

Installation: 

Replace self-locking nut.

Tightening torque: 31 35 5AZ, see 31 35 STABILIZER BAR .