37 14 512 Replacing rear ride-height sensor (early version)

Disconnect plug connection (1).

Release nut (3) and disconnect jointed rod.

Tightening torque: 37 14 7AZ  , see 37 14 ELECTRIC COMPONENTS .

Release screws (4) and remove ride-height sensor.

Installation: 

Sensor lever (2) must point from ride-height sensor to right rear wheel.

Tightening torque: 37 14 6AZ  , see 37 14 ELECTRIC COMPONENTS .

Fig 1: Plug Connection, Nut, Screws And Sensor Lever

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: 

• Check headlight adjustment, correct if necessary, see 63 10 004 ADJUSTING HEADLIGHTS .