00 7 500 Universal puller Kukko 17/K

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing bearing inner race from drive flange at rear wheel bearing

Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R56, RR1

Order number: 00 7 500

Universal puller Kukko 17/K

Consisting of:

1 = 00 7 501 Pressure spindle with bridge

2 = 00 7 502 Adjusting spindle (2 x) with knurled nuts (4 x)

3 = 00 7 503 Pressure spindle, side

4 = 00 7 504 Adjusting jaws (2 x)

5 = 00 7 505 Adjusting screws (2 x) with nuts

Note: For adjusting jaw (2 x)

6 = 00 7 506 Extension (2 x)

7 = 00 7 507 Bridge

Fig 1: Universal Puller Kukko 17/K (00 7 500)

Courtesy of BMW OF NORTH AMERICA, INC.