61 1 150 Releasing tool kit

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Note: For circular connector / press-out tool - Contains kits 61 1 130, 61 1 140 and 61 1 180 Replaced by special tool 61 0 300 from 09/2005.

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E65, E66, E83, E85, R50, R53, RR1

Storage location: K 106

Order number: 61 1 150

Releasing tool kit

Consisting of:

61 1 151 Press-out tool

Note: For Power timer contacts / AMP and Bosch Replaced by special tool 61 0 315 from 09/2005.

61 1 152 Press-out tool

Note: For Micro timer contacts Replaced by special tool 61 0 323 from 09/2005.

61 1 153 Releasing tool

Note: For retaining tab of relay holder

61 1 154 Replacement sleeve dia. 1.5 mm for 61 1 139

Note: Order number was temporarily assigned for case inlay in 8/95 on delivery of case Replaced by special tool 61 0 311 from 09/2005.

61 1 155 Replacement sleeve dia. 3.5 mm for 61 1 133

Note: Replaced by special tool 61 0 306 from 09/2005.

61 1 156 Replacement sleeve dia. 2.5 mm for 61 1 132

Note: Replaced by special tool 61 0 304 from 09/2005.

61 1 157 Replacement sleeve dia. 1.5 mm for 61 1 131

Note: Replaced by special tool 61 0 302 from 09/2005.

61 1 158 Case with inlay

Note: Replaced by special tool 61 0 329 from 09/2005.

61 1 159 Operating instructions

61 1 131 Press-out tool

Note: Replaced by special tool 61 0 301 from 09/2005

61 1 132 Press-out tool

Note: For 2.5 mm round contacts Replaced by special tool 61 0 303 from 09/2005.

61 1 133 Press-out tool

Note: For 3.5 mm round contacts Replaced by special tool 61 0 305 from 09/2005.

61 1 134 Press-out tool

Note: For Mini flat spring contacts Replaced by special tool 61 0 312 from 09/2005.

61 1 135 Press-out tool

Note: For standard flat spring contacts Replaced by special tool 61 0 314 from 09/2005.

61 1 136 Press-out tool

Note: For Power timer contacts (G & H) Replaced by special tool 61 0 316 from 09/2005.

61 1 137 Press-out tool

Note: For timer contacts Replaced by special tool 61 0 313 from 09/2005.

61 1 138 Socket wrench

Note: For telltale lamps (instrument cluster)

61 1 139 Press-out tool

Note: Slotted sleeve for Kostal round contacts with dia. 1.5 mm Replaced by special tool 61 0 311 from 09/2005.

61 1 141 Releasing tool

Note: For D 2.5 / ELA, 4-pin, round

61 1 142 Releasing tool

Note: For D 2.5 / ELA, 7-pin, round

61 1 143 Releasing tool

Note: For D 2.5 / ELA, 12 -pin, round

61 1 144 Releasing tool

Note: For D 2.5 / ELA, 25 -pin, round

61 1 145 Releasing tool

Note: For D 1.5 / ELA, 10 -pin, round

61 1 149 Replacement blades

Note: For press-out tool 61 1 148

61 1 148 Press-out tool for SLK

Note: SLK = sensor laminated contacts Replaced by special tool 61 0 319 from 09/2005.

61 1 180 Press-out tool

Note: For load current contacts Replaced by special tool 61 0 318 from 09/2005.

Fig 1: Releasing Tool Kit (61 1 150)

Courtesy of BMW OF NORTH AMERICA, INC.