61 0 300 Releasing Tool (Complete Kit)

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Measuring and testing equipment

Note: Replaces from 09/2005 special tool 61 1 150. From 06/2006 extended by tools 61 0 325 - 61 0 331.

Series: E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2

SI number: 2 05 05 (217)

Order number: 61 0 300

Releasing tool (complete kit)

Consisting of:

1 = 61 0 301 Release tool for round contacts (diameter 1.5)

Note: Replaces from 09/2005 special tool 61 1 131

2 = 61 0 302 Replacement sleeve D=1.5

Note: Replaces from 09/2005 special tool 61 1 157

In conjunction with: 61 3 301

3 = 61 0 303 Release tool for round systems with D=2.5

Note: Replaces from 09/2005 special tool 61 1 132

4 = 61 0 304 Replacement sleeve (D=2.5)

Note: Replaces from 09/2005 special tool 61 1 156

5 = 61 0 305 Release tool for round contacts (D=3.5)

Note: Replaces from 09/2005 special tool 61 1 133

6 = 61 0 306 Replacement sleeve (D=3.5) for 61 0 305

Note: Replaces from 09/2005 special tool 61 1 155

7 = 61 0 307 Release tool for socket-side round contacts (D=2.5)

8 = 61 0 308 Replacement sleeve for special tool 61 0 307 (D=2.5)

9 = 61 0 309 Release tool for pin-side round contact (D=1.5) manufacturer: Kostal

Note: Replaces from 09/2005 special tool 61 1 139

10= 61 0 311 Replacement sleeve for special tool 61 0 309

Note: Replaces from 09/2005 special tool 61 1 154

11= 61 0 312 Release tool for flat spring contact with a detent lug (1.6 mm)

Note: Replaces from 09/2005 special tool 61 1 134

12= 61 0 313 Release tool for flat spring contacts with a snap-in pin (1.9 mm)

Note: Replaces from 09/2005 special tool 61 1 137

13= 61 0 314 Release tool for flat spring contact with a snap-in pin (2.7 mm)

Note: Replaces from 09/2005 special tool 61 1 135

14= 61 0 315 Release tool for flat spring contacts with double snap-in pin "Micro-Timer 2"

Note: Replaces from 09/2005 special tool 61 1 151

15= 61 0 316 Release tool for flat spring contacts with double snap-in pin "SPT 4.8" "JPT 2.8"

Note: Replaces from 09/2005 special tool 61 1 136

16= 61 0 317 Release tool for LSK 8

Note: Replaces from 09/2005 special tool 61 1 200

17= 61 0 318 Release tool for "Maxi Power Timer 9.5"

Note: Replaces from 09/2005 special tool 61 1 180

18= 61 0 319 Release tool for sensor laminated contacts ("SLK2.8")

Note: Replaces from 09/2005 special tool 61 1 148

19= 61 0 321 Release tool for sensor laminated contacts with unlocking element ("SLK 2.8")

20 = 61 0 322 Release tool for mini laminated contact ("MLK 1.2 mm")

21 = 61 0 323 Release tool for flat spring contacts with a detent lug (MQS)

Note: Replaces from 09/2005 special tool 61 1 152

22 = 61 0 324 Release tool for secondary locking

Note: Universal tool for damage-free opening/removal of secondary locks

23 = 61 0 329 Case with foam inlay without tools

Note: Storage system for release tools from set 61 0 300

24 = 61 0 325 Release tool "JPT"

25 = 61 0 326 Release tool "MQS"

Note: For releasing all micro contacts

26 = 61 0 327 Plug-in aid

Note: For inserting contacts (0.64 - 1.2 mm) in housing

27 = 61 0 328 Plug-in aid

Note: For inserting contacts (2.8 - 4.8 mm) in housing

28 = 61 0 331 Release tool "SLK 5.8"

Note: For releasing "SLK 5.8 mm" contacts

Fig 1: Releasing Tool (61 0 300)

Courtesy of BMW OF NORTH AMERICA, INC.