23 41 External Gearshift Components
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
EXTERNAL GEARSHIFT COMPONENTS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Servomotor / actuator to transmission housing Insert screws with screw securing adhesive | D/G/HSMG transmission | M6 | 10 Nm | |
| 2AZ Switch for gear recognition to servomotor | DSMG transmission | M5 | 6 Nm | |
| 3AZ Hydraulic lines to servomotor | DSMG transmission | M12x1 | 17 Nm | |
| 4AZ Actuator to transmission casing | DSMG transmission | M8 | 25 Nm | |
| 5AZ Reversing light switch | B/C/D/E/F/G/H/I/J-transmission | M12 | 16 Nm | |
| 6AZ Pressure accumulator to valve block | C/G/HSMG transmission | 30 Nm | ||
| 7AZ Protective plate Expansion tank Shift actuator Hydraulic pump Valve block to transmission housing Ground strap to transmission housing |
C/G/HSMG transmission | M6 | 10 Nm | |
| 8AZ Protecting plate / valve block to transmission housing / | C/G/HSMG transmission | M8 | 20 Nm | |
| 9AZ Valves to valve block | C/G/HSMG transmission | M4 | 3.5 Nm | |
| 10AZ Pressure sensor to valve block | C/G/HSMG transmission | 15 Nm | ||
| 11AZ Shift/selector sensor to transmission housing | C/G/HSMG transmission | M4 | 2.8 Nm | |
| 12AZ Retaining screw for hydraulic line | C/G/HSMG transmission | 18 Nm | ||
| 13AZ Banjo bolt for hydraulic line | CSMG transmission | 16 Nm | ||
| 14AZ Heat shield to expansion tank/ pump bracket | H transmission | 6 Nm | ||
| 15AZ Clutch speed sensor | G/H-transmission | 35 Nm | ||
| 16AZ Transmission oil cooler to transmission | E60 / E63 / E64 / E61 | 7-speed SMG M6x35 | 10 Nm | |
| 17AZ Transmission oil screen in transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M18 | 25 Nm | |
| 18AZ Banjo bolt to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M16x1.5 | 40 Nm | |
| 19AZ Union nut to screwed socket | E60 / E63 / E64 / E61 | 7-speed SMG | 40 Nm | |
| 20AZ Oil cooler connection to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG | 40 Nm | |
| 21AZ Oil pump to transmission oil cooler | E60 / E63 / E64 / E61 | 7-speed SMG M6x20 | 10 Nm | |
| 22AZ Speed sensor to transmission | E60 / E63 / E64 / E61 | 7-speed SMG M6x16 | 10 Nm | |
| 23AZ Temperature and pressure sensor to hydraulic unit | E60 / E63 / E64 / E61 | 7-speed SMG | 15 Nm | |
| 24AZ Clamp, pressure accumulator to transmission | E60 / E63 / E64 / E61 | 7-speed SMG | 22 Nm | |
| 25AZ Pressure accumulator to pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 29 Nm | |
| 26AZ Pump block to transmission | E60 / E63 / E64 / E61 | 7-speed SMG | 22 Nm | |
| 27AZ Banjo bolts, pressure lines clutch actuator and pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 25 Nm | |
| 28AZ Screws, actuator block | E60 / E63 / E64 / E61 | 7-speed SMG | 25 Nm | |
| 29AZ Union nut, hydraulic line, actuator block | E60 / E63 / E64 / E61 | 7-speed SMG | 11 Nm | |
| 30AZ Pump to electric motor | E60 / E63 / E64 / E61 | 7-speed SMG | 5 Nm | |
| 31 AZ Electric motor to pump block | E60 / E63 / E64 / E61 | 7-speed SMG | 5 Nm |