12 52 Plug Connections, Terminals, Loose Parts
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Wiring harness to cylinder head | N52 | M6 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | |
| Jointing torque | 4 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52, N54, N52K, N51,N53 | M8 | Replace screws | |
| Jointing torque | 8 Nm | |||
| Torque angle | 45 ° |