12 41 Starter Motor With Mounting
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
STARTER MOTOR WITH MOUNTING - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x85 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Battery positive lead to starter | N52, N52K, N51, N53 | M8 | 13 Nm |