11 22 Flywheel
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
FLYWHEEL - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screws (6 x) Flywheel to crankshaft for vehicles with SA205 (automatic transmission). |
N52K | M12 x 25.5 | Replace screws. Jointing torque and final tightening must be observed without fail. |
|
| 1. Jointing torque | 30 Nm | |||
| 2. Final tightening | 125 Nm | |||
| 2AZ ISA screws (6 x) Flywheel to crankshaft for vehicles without SA205 (automatic transmission). |
N52K | M12 x 25 | Replace screws. | 120 Nm |