11 13 Oil Pan
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
OIL PAN - TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Optional extra designation: SA205 = Automatic transmission |
||||
| 1AZ Plug (1 x) Oil drain to oil sump. |
N52K | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ ASA screws (20 x) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 x 26 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ ASA screws (5 x M8 x 112) (3 x M8 x 92) Oil sump (aluminium) to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M8 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | |||
| Torque angle | 180 ° | |||
| 4AZ ASA screws (7 x) Oil deflector to bedplate. The end faces of the aluminium screw heads are painted blue. |
N52K | M6 x 20 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | |||
| Torque angle | 90 ° | |||
| 5AZ ASA screws (3 x) Transmission to oil sump. |
N52K | M8 x 50 | 19 Nm | |
| 6AZ Hexagon nuts (2 x) Holder, transmission oil cooler line, to oil sump for vehicles with optional extra SA205. |
N52K | BM6 | 8 Nm | |
| 7AZ Hexagon nut (1 x) Holder, coolant hose, to oil sump. |
N52K | M6 | 9 Nm | |
| 8AZ Hexagon screw (1 x) Holder, coolant hose, to oil sump. |
N52K | M10 x 18 | 21 Nm |