64 11 942 Replacing evaporator temperature sensor

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim panel for pedal assembly. See 45 INSTRUMENT CLUSTER TRIM PANEL .

NOTE: Left footwell heating duct removed for purposes of clarity.

Pull out evaporator temperature sensor (1) and disconnect plug connection (2).

Fig 1: Pull Out Evaporator Temperature Sensor (1) And Disconnect Plug Connection (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: Ensure evaporator temperature sensor (1) is correctly seated.