64 11 800 Replacing servodrive on gear for flap control (A/C control)

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT GLOVEBOX WITH HOUSING .

Move rotary knob (1) into position illustrated.

Fig 1: Move Rotary Knob (1) Into Position Illustrated

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1). Unlock servo-drive (2) and remove towards bottom.

Fig 2: Disconnect Plug Connection (1)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: If necessary, align shaft for defrosting flaps and drive (see illustration).

Fig 3: Align Shaft For Defrosting Flaps And Drive

Courtesy of BMW OF NORTH AMERICA, INC.