17 11 046 Removing and installing / replacing module carrier

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove power steering cooling loop
If necessary, slacken A/C condenser and secure against damage and against falling down. Refer to Remove A/C condenser. See 64 53 550 REMOVING AND INSTALLING OR REPLACING CAPACITOR FOR THE HEATING AND AIR CONDITIONING SYSTEM .

Release expander rivet and remove left module carrier (1). Installation: Rubber mounts fall out easily, ensure correct installation position.

Fig 1: Release Expander Rivet And Remove Left Module Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Remove right module carrier (1). Make sure rubber mount is in correct installation position.

Fig 2: Remove Right Module Carrier (1)

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing module carrier: Convert power steering cooling loop .