61 31 440 Removing and installing/replacing temperature switch for heated windshield spray jets
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- E52: Detach front right wheel arch cover (front section)
- E83: Remove front underbody protection, see 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION
If necessary, unlock associated plug connection and disconnect.
Unclip temperature switch for heated windshield spray jets (1) in direction of arrow and remove.