51 47 135 Removing and installing/replacing left or right lashing rail in luggage compartment floor
Necessary preliminary tasks:
- Remove inner window cavity cover strip, see 51 37 261 Removing and installing/replacing window cavity cover strip for door window, rear left or right
- Remove rear luggage compartment floor trim, see 51 47 102 Removing and installing/replacing luggage compartment floor trim panel
- Remove front trim for luggage compartment floor, see 51 47 131 Replacing front trim for luggage compartment floor
- Remove top trim from tail panel, see 51 46 050 Removing and installing/replacing top trim on rear apron
- Remove luggage compartment wheel arch trim on left or right, see 51 47 151 Removing and installing / replacing left luggage compartment wheel arch trim
Right side only:
- Remove storage compartment in luggage compartment on right, see 51 47 ... Removing and installing/replacing storage compartment in luggage compartment on right
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Release screws (1).
Lashing rail (2):
- Slide approx. 2 cm towards rear
- Feed out towards top front
Replacement:
If necessary, remove reinforcement plate (1) with guide (2) from lashing rail (3) and fit on new part.