65 52 010 Removing and installing on-board monitor

Remove center fresh air grill (with decorative strip). Refer to 64 22 161 REMOVING AND INSTALLING/REPLACING CENTER FRESH AIR GRILL (HEATING) or 64 22 162 REMOVING AND INSTALLING/REPLACING CENTER FRESH AIR GRILL (AIR CONDITIONING) .

Pull off molded menu button (1) in direction of arrow.

Fig 1: Pulling Off Molded Menu Button

Courtesy of BMW OF NORTH AMERICA, INC.

Insert screwdriver (1) in opening (3) of lock (4).

Fig 2: Inserting Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Using screwdriver (1), turn lock (2) as far as it will go in direction of arrow and pull out complete on-board monitor (3) on left towards rear.

Fig 3: Unlocking On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Then, using screwdriver (1), turn lock (2) as far as it will go to left and pull out complete on-board monitor (3) on right towards rear.

Disconnect plug connections (1) and (2) and remove complete on-board monitor.

Fig 4: Removing On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.