84 11 510 Removing And Installing/Replacing Eject Box (Fixed Mounting)

NOTE: Operation is described in:
Removing insert in storage tray. Refer to 51 16 200 REMOVING AND INSTALLING STORAGE TRAY .

Remove insert in storage tray (1) in direction of arrow from storage tray (2).

Fig 1: Removing Insert In Storage Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 2: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retainer (1) in direction of arrow. Disconnect plug connection (2).

Fig 3: Unlocking Retainer

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook cable duct (1) in direction of arrow and remove eject box (2).

Fig 4: Unhooking Cable Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replacement:

Disconnect plug connection (1).

Fig 5: Disconnecting Plug Connection
Courtesy of BMW OF NORTH AMERICA, INC.