LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> M3 2D Convertible, S6 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair >> Rear Bumper >> 51 12 001 Replacing Rear Bumper (Convertible/Coupe)

51 12 001 Replacing Rear Bumper (Convertible/Coupe)

Replacing Rear Bumper Center Section (Carrier) (51 12 011): 

Remove complete rear bumper. Refer to 51 12 000 REMOVING AND INSTALLING COMPLETE REAR BUMPER ,

Convertible with TV only:

Remove TV bumper antenna.

Release expansion rivets (1) and remove bumper center section (2) (carrier).

NOTE: Shock absorbers are not on carrier.
Fig 1: View Of Expansion Rivets
G03118761Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure nut (1) is properly fitted in carrier (2).

Fig 2: Identifying Retaining Nut
G03118762Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The work for "Replacing rear bumper center section (carrier)" (51 12 011) ends here.

Replacing Rear Bumper Trim (51 12 157) And Replacing Rear Bumper (51 12 001): 

Remove reflecting tail light from rear bumper. Refer to 63 14 120 REMOVING AND INSTALLING/REPLACING REFLECTING TAIL LIGHT ON REAR BUMPER (COUPE, CONVERTIBLE) .

Unclip cover (2) for towing attachment from opening (1).

Lift out retaining strap (3) and remove cover (2).

Fig 3: Locating Retaining Strap
G03118763Courtesy of BMW OF NORTH AMERICA, INC.