51 45 031 Replacing Instrument Panel Trim

Remove left fresh air nozzle. Refer to 64 22 135 REMOVING AND INSTALLING / REPLACING LEFT FRESH-AIR GRILL .
Remove panel for instrument panel. Refer to 51 45 030 REMOVING AND INSTALLING INSTRUMENT PANEL TRIM .

Unfasten screws (1) and remove bracket (2). Convertible only:

Stick sketch below to new instrument panel; this is included with the replacement instrument panel.

Cut out instrument panel at bottom in accordance with sketch.

Fig 1: Locating Bracket Retaining Screws

G03119190

Courtesy of BMW OF NORTH AMERICA, INC.

Detach retainers (1) and remove cover (2) for steering column paneling.

Fig 2: Identifying Cover For Steering Column Paneling

G03119191

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release screw (1) and detach air duct (2) on left/right.

Fig 3: View Of Air Duct

G03119192

Courtesy of BMW OF NORTH AMERICA, INC.

Lift fresh air grill (1) above catches (2) and press out.

Fig 4: Locating Catches On Fresh Air Grill

G03119193

Courtesy of BMW OF NORTH AMERICA, INC.

Remove metal nuts (1) from tunnel (2) of instrument panel.

Fig 5: Identifying Metal Nuts On Tunnel Of Instrument Panel

G03119194

Courtesy of BMW OF NORTH AMERICA, INC.

Passenger side:

Remove retainers (1) and (2).

Remove plastic nuts (3) and metal nuts (4).

Fig 6: Locating Plastic Nuts And Metal Nuts

G03119195

Courtesy of BMW OF NORTH AMERICA, INC.

Driver's side:

Remove clips (1).

Fig 7: Removing Retaining Clips

G03119196

Courtesy of BMW OF NORTH AMERICA, INC.

Driver's side:

Remove metal nuts (1) and plastic nuts (2).

Fig 8: View Of Metal Nuts And Plastic Nuts

G03119197

Courtesy of BMW OF NORTH AMERICA, INC.

Driver's side:

Remove metal nuts (1) and plastic nuts (2).

Fig 9: Identifying Metal Nuts And Plastic Nuts

G03119198

Courtesy of BMW OF NORTH AMERICA, INC.