51 47 161 Removing And Installing/Replacing Right Trunk Wheel Arch Trim

1. Remove socket housing for tail light in side section, refer to 63 21 055 REPLACING A SOCKET HOUSING FOR LEFT OR RIGHT REAR LIGHT (COUPE, CONVERTIBLE) .
2. Version with through-load system:
3. Remove rest side section from rear seat backrest, refer to 52 26 008 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT SIDE SECTION OF REAR SEAT BACKREST (THROUGH-LOADING SYSTEM) (COUPE) .

Take out luggage compartment floor trim panel (1).

Remove cover for spare wheel/jack.

Fig 1: Removing Luggage Compartment Floor Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out emergency release mechanism for tank cap a little. Unclip cable (1) from clip (2).

Fig 2: Unclipping Cable From Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Turn rotary clip (1) through 90° and remove.

Fig 3: Identifying Rotary Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Partially release panel for trunk separating wall.

Partially lever out outer trim (1) and remove trunk wheel arch trim (2).

Fig 4: Removing Trunk Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.