Phase 2

The button must now be released ("zero position") and then pressed again in the position "overpressed closed" within 4 s. The window is now closed without anti-trapping protection with full force. In the event of blocking, the window is powered until the motor thermal protection is activated or the window has moved to the upper stop.

Emergency closing is terminated when the button is released. For safety reasons, it is always possible to open the window independently of the thermal protection.

If there is no renewed activation of the emergency-close mode within 4 s (overpressing and holding), anti-trapping protection returns to its normal state. "Emergency close" is not operational from a vehicle speed of > 16 km/h (10 mph).

When the child lock is engaged, the emergency-close function cannot be activated by the local switches in the rear doors but only by the switch block in the driver's door.

An emergency-closing operation activated by the switch block in the driver's door cannot be interrupted by the local buttons in the front passenger door or the rear doors.

The emergency-close function can be completely deactivated by means of coding.