Operating The Windows: Closing

The closing operation starts after a delay; for this purpose, the key must be held in the locking (VR) or double locking (ZS) position during the entire closing operation. The closing operation can be terminated at any time by turning the key back. The sequence begins again after 0.5 s if a ZS command is entered again within 3 s of the cancellation.

The individual windows and the sunroof are closed in the following sequence: rear power windows (PWs), front PWs and sunroof. The PWs are activated so that two PWs are always switched on simultaneously (starting with the rear). The front PWs are started after a 1 s delay. The sunroof is closed immediately when all 4 windows are closed or 3.5 s after the start of convenience closing.