Child Lock-Out

Operation of the two rear power-window buttons is disabled by means of the child-lock button in the switch block in the driver's door. When the child lock is engaged, it is only possible to operate the rear power windows from the driver's switch block or via the convenience function. An LED in the button indicates the current status of the child lock.

The LED is activated by the power-window master in the CAS. No opening/closing function is triggered when the child lock is engaged.

In the event of a fault, the Check Control message "Child lock not functioning" in the instrument cluster is sent by the CAS.

It is only possible to deactivate the child lock in conjunction with a valid Remote Control in the ignition.

The child lock remains engaged after a CRASH telegram has been received.